ImdexLeadingBrandLogo

REFLEX MILL™

Ultra portable in-field sample preparation

Enquire now

In-field Geoanalysis

Driller-Operable Geophysics

Downhole Navigation

Structural Geology

Drilling Optimisation

The REFLEX CRUSHER™ and REFLEX MILL™ work together as a portable, rapid, in-field sample preparation system, providing the tools needed to crush and mill coarse material to fine-grained powder, for reliable geochemical or mineralogical analysis.

Able to be set up in minutes, almost anywhere, the systems are safe and easy to use, providing the productivity you need for on site sample preparation in your drilling and sampling program.

Complete in-field sample preparation

The REFLEX MILL™ is a portable sample preparation solution designed to reduce material from 3-4mm to ~100 microns, producing an optimal sample for use in the REFLEX PRESS™.
The REFLEX MILL™ is designed to reduce <4mm material to a fine powder (adjustable from <100 to 500 microns) in a single pass. The REFLEX MILL™ is supplied with batch tray for samples up to ~100g and a flow-through chute for larger samples which allows the products to be collected using another container, adaptable to your own workflow.

The REFLEX MILL™ utilizes custom, hard-wearing tungsten carbide plates to minimize contamination and prolong plate life even with difficult materials. Ease of cleaning and operation contribute to increased productivity rates, where a typical 100 g sample will mill to <150 microns in approximately 1.5 minutes. The custom plates and easy to clean design minimise contamination and increase productivity.

Quality geochemical data in 10 minutes, where and when you need it.

Ultimate portability

Arriving in pelican cases that fit in the back of a Ute, the REFLEX CRUSHER™ AND REFLEX MILL™ can be set-up in minutes offering you in-field sample preparation almost anywhere.
Powerful DC motors powered by universal AC-DC power supplies, mean the systems are easy and safe to use, providing the productivity you need for on-site quality sample preparation in your drilling and sampling program.

Enquire Now

\

Technical Specifications - REFLEX MILL

  • Intended use of the equipment
  • The REFLEX MILL™ is designed for use indoors or outdoors. Use in dry conditions only.
  • Maximum sample size
  • 3 mm (diameter)
  • Batch size
  • 0.1 KG
  • Milled size
  • 50 to 200 microns
  • Dimensions
  • 340(H) x 384(W) x 384(L) mm (with chute fitted)
  • Kit Weight with Case
  • 36 kg
  • Unit Weight
  • 22.5 kg
  • Milling disks
  • Tungsten Carbide
  • Noise level
  • 80dBA @ 1m
  • Equipment ratings - Input power
  • Input Voltage: 110-240V AC
  • Input current max: 5amps
  • Rated Power: 500W
  • Frequency: 50/60Hz
  • Equipment ratings - Environmental conditions
  • Maximum Operating Temp: 50℃
  • Minimum Operating Temp: 0℃
  • Maximum Storage Temp: 80℃
  • Minimum Storage Temp: -20℃
  • Humidity: 80% Non Condensing
  • Equipment IP rating
  • IP51
  • Maintenance & servicing
  • No serviceable parts inside.
  • Authorised Accessories
  • Only REFLEX™ approved accessories can be used.

Brochure

Download REFLEX CRUSHER™ AND MILL™ Brochure – English